00041808.DOC, Version 1.1
10/11
OPERATING DETERMINATIONS
This device is a portable luminaire for garden use for creating decorative effects. This product is only allowed
to be operated with the voltage given on the type-plate.
This device is splash-proof (IP X4) and therefore qualified for indoor and outdoor use. In order to maintain
this protection grade after opening the housing, any rubber sealings must be examined for damages and
always be correctly installed.
For outdoor use, the installer must always make sure to connect a rubber cable H05R. For installations in the
ground, an underground power cable NYY must be used!
All valid instructions concerning the installation of cables outdoors or in the ground must be adhered!
The ambient temperature must always be between -25° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The maximum relative humidity is 100 % with an ambient temperature of 25° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that there are no cables lying around. You endanger
your own and the safety of others!
This luminaire must never be covered. Danger of burning!
The F-symbol means: this device can be installed on normal inflammable surfaces.
The symbol
- - -m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than the given value.
The maximum ambient temperature T
a
must never be exceeded.
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, etc.
INSTALLATION
The device can be installed inside or outside.
Attachment
Before attaching the device, make sure that the installation area can hold a minimum point load of 10 times
the device's weight.
Caution: Please DO NOT install the LED Ball by the power cable! For hanging installation, please use
only the appropriate chains and quick links with screw caps.
Please refer to the instructions under Operating Determinations.
The device must only be installed at a vibration-free, oscilation-free and fire-resistant location.
