INSTALLATION GUIDE
CNPx-50
Page 1
#44-000017
Updated 0
4
.
2
0.1
8
US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
The installation must only be performed by a licensed electrician.
To prevent death, injury or damage to property, this product must be installed in accordance to National
Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.
Disconnect power before installing the product or servicing it.
Wait until fixture has cooled down before installing or servicing the fixture.
MIN. 90°C SUPPLY CONDUCTORS
WARNING
l
l
l
l
l
MODEL NUMBERS
This installation instructions covers the following products:
Power Supplies
1. 96W Power Unit: PUC-UNV1-3570 or PUC-UNV2-3570
2. 100W Power Unit PUC-UNV1-4100 or PUC-UNV1-4100DM or PUC-UNV2-4100DM
3. 192W Power Unit: PUC-UNV1-7140 or PUC-UNV2-7140
4. 200W power Unit: PUC-UNV1-8200 or PUC-UNV1-8200DM or PUC-UNV2-8200DM
Luminaires
1. CNP1-50 Series Luminaire
2. CNP2-50 Series Luminaire
3. CNP3-50 Series Luminaire
4. CNP4-50 Series Luminaire
BOX CONTENTS
Mounting Plate Assembly
Wire Harness/Cover
Assembly
CanopyStar Fixture
LED Driver with Mounting Bracket
sold
separately
not included in
the box
Tools Needed
1. 4” Hole Saw
2. #2 Phillips Screw Driver
3. ¼” Hex Driver
