00092113, Version 1.1
23/28
Operation with the IR-16 Remote Control
The IR remote control allows convenient control of the integrated show programs in automatic mode or
sound-controlled mode. The display indicates the current setting. When actuating a button, always hold the
remote control in the direction of the sensor at the control unit’s front. There must be visual connection
between the remote control and the sensor.
Control via IR remote control not possible in DMX or slave mode.
Notes:
•
The remote control is supplied with a battery inserted. An insulating foil between the
battery and the battery contacts prevents the battery from being discharged during
storage. Prior to the first operation remove the foil from the battery support on the
rear side of the remote control. Otherwise operation of the
remote control is not possible.
•
If the range of the remote control decreases, replace the
battery. For this purpose, on the rear side of the remote
control press the small bar with the groove to the right and
at the same time remove the battery support. For
operation, one 3 V button cell type CR 2025 is required. When inserting, pay
attention that the positive pole of the button cell shows upwards in the support.
•
Remove the battery from the remote control as a precaution if the device is not
used for a longer period of time.
Button
Function
Auto Mode
Speed adjustable with 0—9
Sound Mode
Speed adjustable with 0—9
Auto-LED-Program
Speed adjustable with 0—9
Auto-Strobe-Program
Speed adjustable with 0—9
Strobe on/off
Press the button once and the strobe is on, press it again and it is off
General Functions
On/off
No function
~
Running speed of the show programs, increasing
Pause
/
Color selection
