00092113, Version 1.1
22/28
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-16 remote control or in DMX-controlled mode via any
commercial DMX controller.
The LED display shuts off after 30 seconds of inactivity. With the touch of a button it lights up again.
Microphone sensitivity in Sound Control Mode is adjustable via the rotary control on the rear of the device.
Menu structure
Mode
Program
Function
Aut
AutM
Auto Program 1
: Beams and Strobe
AutP
Auto Program 2:
Beams
AutF
Auto Program 3:
Strobe
S.01 ~ S.99
Program speed, increasing
Sou
SouM
Sound Program 1:
Beams and Strobe
SouP
Sound Program 2:
Beams
SouF
Sound Program 3:
Strobe
CoL
CoLo
Manual color adjustment
R/G/B/UXXX
Single LED color adjustment
S.00 ~ S.99
Strobe-Speed;
S.00 all an,
S.01~ S.99 increasing
Str
Stro
Auto Strobe-Program
St01 ~ St18
18 Strobe Programs
DMX
01Ch/04Ch
DMX Channel Mode
dXXX
Startaddress
SLA
Slav
Slave-Mode
SYS
LEDS
Power saving mode:
ON / OFF
vers
Current software version
test
The devices performs a self test of all available functions
rest
Default
Master/Slave operation
The master/slave operation enables that several devices can be synchronized and controlled by one master
device.
On the rear panel of the device you can find an XLR jack and an XLR plug, which can be used for
connecting several devices.
Choose the device which is to control the effects. This device then works as master device and controls all
other slave devices, which are to be connected to the master device via a DMX-cable. Connect the OUT jack
with the IN plug of the next device.
Set the M
ASTER
device to one of the Stand Alone modes. Please see further instructions under
Menu
structure.
