©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. Aug 2006
Instructions Part number IN1016 Ed G
18
Servicing Instructions
Note:
This stove must be serviced regularly, at least once a year by a qualified and competent gas
fitter registered with C.O.R.G.I., the Council of Registered Gas Installers.
Annual Service
The following outlines the minimum work required at the annual service.
a) Carry out the ignition functional check.
b) Carry out the flame functional check.
c) Remove all ceramic components by referring to the coal layout diagram
d) Use the vacuum cleaner to remove all traces of dust and debris from inside the stove paying
particular attention to the burner ports.
e) Carry out any remedial work as a result of the functional checks.
f) Inspect all the ceramic parts and replace any which are broken or badly damaged. Gently clean
with a soft brush.
g) Repeat the functional checks for the ignition and the flame failure devices.
h) Check gas operating pressures.
i) Check gas supply.
j) Check installation for gas leaks and check flue for clearance of products of combustion.
k) Complete the yearly service record at the rear of this document.
l) Confirm appliance is left in a safe operational condition.
Use only genuine replacement parts, non standard components could invalidate the warranty
and may be dangerous.
Thermocouple
Ignition Electrode
Pilot Assembly
Correct position of
thermocouple in pilot flame
