©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD.Aug 2006
Instructions Part number IN1016 Ed G
15
Fitting the Remote Control
Fitting the Electrical Connections
The wiring loom has 5 connections.
a. 1 x four wire white connector. Connect this to the remote control receiver.
b. 2x small single wire connectors. Fit to the micro switch.
c. 2x larger connectors fit to the motor. Note these two connectors are different in size and fit only
to the appropriate sized connector on the motor.
Receiver location
Place the receiver on the hearth under the gas valve, or hidden on the hearth behind the stove.
Motor and Micro switch
Gas Pressure Test Nipple Locations
Operating
Pressure
Test Nipple
System Pressure Test
Nipple (Line Pressure)
