Eurogames Srl – Operation and maintenance handbook – Mini Car
23
16. REMOTE CONTROLLER EG09TEL
Fig. 22
Functions
This remote control unit allow the remote configuration of products that mount the “EG09 Digital Timer”.
“Wireless Coin”, “Start”, “Stop” or “game End” commands can be sent to all the products or to a single
product. The products can be configured with its own number from 1 to 32.
A standard product is configured as number “1” during production. If control of a single product is
required the “RemoteControl” configuration parameter in the EG09 Digital Timer must be set correctly. In
this case a different number must be set in every available product (for more information please check
the EG09 Digital Timer Configuration Manual).
As an example here you can find a part of the EG09 Digital Timer Configuration manual.
RemoteControl=01
Device number for remote control functions (1 to 32). If control of a single device is
required this number must be different in any device. If this number is not unique in all
devices there can be communication problems with the remote control unit.
Also when all the products are configured with a different number it still be possible to use the “START”,
“STOP” commands and other functions with the “ALL” destination number. This option control all the
products at the same time.
Keyboard description
[ON/OFF]: If this button is kept pressed for about 4 seconds the remote control display will turn on or off.
If pressed again for a short time the backlight will be turned on or off. The remote control turns off
automatically after about 10 minutes if not used.
[START/STOP]: These buttons send a Start or Stop command to the enabled products. They can be
used when the remote control is off. In this case the command will be sent to all the products. If the
remote control unit is ON the command will be sent to the selected device. The “Device Selected” option
on screen can be changed to “ALL” value or to a specific device number.
If the “START” button is kept pressed for about 4 seconds and released a “Wireless Coin” is sent to the
selected device. If the “STOP” button is kept pressed for about 4 seconds and released an “End”
command is sent to the selected device. The running product will stop as time end condition. This
function may be not available in all products.
[ALL]: Selects “ALL” as Device Selected” option. The remote control unit will be ready to broadcast
command to all the available and enabled products.
[+ / -]: The [+] and [-] buttons have different functions. The menu item can be selected or a specific
configuration parameter value can be changed (for more information please check the EG09 Digital
Timer Configuration Manual).
[SEL]: This button have the same function of the [ENTER] buttons on EG09 Digital Timer when
programming mode is enabled.
[PROG]: This button enable or disable the programming mode.
WARNING! Use the programming mode only when the product is not in use. Programming a
running product can lead to bad configuration or undefined behavior.
Содержание MINICAR
Страница 2: ......
Страница 21: ...Eurogames Srl Operation and maintenance handbook Mini Car 21 WIRING DIAGRAM Fig 19...
