EuroGames MINICAR, Справочник по эксплуатации и техническому обслуживанию

Страница: 12 / 32

Eurogames Srl – Operation and maintenance handbook – Mini Car
12
10. STOP SETTING
The “Minicar” series Automatic Game can stop its race in a desired point of the track (for instance, in
the parking area). To adjust the car stopping:
1. Place the magnetic strip (delivered by EuroGames S.r.l. upon Customer’s demand) on the track in
correspondence of the desired stopping point (Fig. 9).
Fig. 9
IMPORTANT
For the positioning of the magnetic strip on the ground, prepare a small trench with the same dimensions
and fix it with silicone or liquid cement (fig. 10); if it is not possible to dig the ground, place the strip on
the ground and create two side access guides (fig. 11).
Fig. 10 Fig. 11
2. Setup the control Timer Box to enable the magnetic band sensor. (Fig.12).
Fig. 12
When the game is over, and the vehicle passes over the magnetic strip, a magnetic sensor D (Fig.13)
located under the body stops it within the approximately two meters needed to consume the inertia
acquired. The stopping distance can be adjusted by programming the digital timer. If, at the end of the
game time, the vehicle does not stop this could be for two reasons:
•
the gap between the magnetic sensor and the magnetic strip is to wide;
•
the magnetic sensor is damaged.
PARKING AREA
VEICLE STOP
MAGNETIC STRIPE
ON THE AREA