Eurochron 1486096, Руководство по эксплуатации

Страница: 39 / 108

The temperature sensor must be plugged into the left side of the
thermo logger for the measurement (figure 1, item 2). A tempera-
ture measurement requires a few seconds time to measure until
the measured value has stabilised and the temperature display has
stopped changing or changing essentially.
Measuring at high temperatures also poses a high risk of
burns. Therefore, use suitable protection equipment (e.g.
temperature-resilient gloves.
When measuring outside of the specifications of the devic-
es, the display and/or app may no longer show any value
at all (depending on how far the range is exceeded).
c) Item no. 1486097: Performing measurement
via the temperature sensor
The insertion temperature sensor of the thermo logger with item
no. 1486097 is very well suitable for temperature measurements in
material to be measured, such as water or foods. The sensor must
be held by the rubberised part of the insertion sensors during the
measurement to avoid influences on the measuring results. The
insertion temperature sensor must be submersed or inserted into
the materials to be measured for this. The material to be measured
must be within the temperature range of the measuring sensor
(-40 °C to 300 °C).
The temperature sensor must be plugged into the left side of the
thermo logger for the measurement (figure 1, item 2). A tempera-
ture measurement requires a few seconds time to measure until
the measured value has stabilised and the temperature display has
stopped changing or changing essentially.
Measuring at high temperatures also poses a high risk of
burns. Therefore, use suitable protection equipment (e.g.
temperature-resilient gloves.
39