Built-in Electric Oven - OE612
6
NOTE:
If the oven is mixed with a different kitchen range, it must observe the rules which are
provided by the manual of the kitchen range.
In order to get the oven operating normally, the type of cabinet must be correct.
Cabinet with a veneer exterior must be assembled with glue which can withstand
temperature up to 120°C.
In accordance with the safe rules, after installation of the oven, it should not touch the
electric parts.
Electrical requirements
These appliances must be supplied with proper voltage and frequency (AC220-240V,
50Hz), and connected to an individual, properly grounded branch circuit, protected by a
circuit breaker (the voltage on the brand which located on the frame of oven).
Brown
Live/Active
Blue
Neutral
Green/Yellow
Ground earth
WARNING! ELECTRICAL SHOCK HAZARD!
•
Electrical ground is required on this appliance.
•
Do not connect to the electrical supply until appliance is permanently grounded.
•
Disconnect power to the junction box before making the electrical connection.
•
This appliance must be connected to a grounded, metallic, permanent wiring
system, or a grounding connector should be connected to the grounding terminal
or wire lead on the appliance.
•
Power supply line should avoid touching the crust sheet metal of the electric oven.
When they touch each other the chances rise that the oven crust sheet metal will
mangle the insulated layer of the power supply line due to the high temperatures.
•
Do not use a gas supply line for grounding the appliance.
