Built-in Electric Oven - OE612
5
Installation
•
Inspect the connection with the power source. Check and ensure a current of 16A
from this power source. A special junction box must be provided and connected by
a qualified person.
•
You can switch off the power of the oven after installation for maintenance
purposes. The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring (in accordance with the wiring rules).
•
Carpentry: Refer to figure 1 or 2 for the appliance dimensions to your oven,
and the space necessary to install the oven. The oven support surface must be
solid plywood or similar material, and the surface must be horizontal from
side to side, left to right and front to rear.
In order to ensure adequate ventilation, the back panel of the cabinet unit must be
removed. There must be an aperture of at least 50 mm between the oven back and
cabinet back.
