6
V- Level of relative humidity
Your cabinet has a humidity measuring function, allowing you to know what the level of relative
humidity is inside the appliance.
The ideal level of humidity is 50%.
If you wish to increase the level of relative humidity in your cabinet, pour the equivalent of one glass
of water into the duct of the tray located at the bottom right-hand side of the cabinet (see diagram
on the following page “Relative humidity level alarm”).
VI- Setting the lighting mode
Your wine cabinet has ambient lighting allowing you to more easily read the labels on your bottles.
Unlike traditional lighting, EuroCave lights emit no ultraviolet and only generate a small amount of heat.
In this way, your wines are stored in total safety.
Additional electricity consumption is less than 7 Watts/hour when lighting is permanently on.
Precautions to observe:
Bright light, do not look directly at the beam.
There are 3 setting options for lighting:
- lighting off,
- lighting on when door opens (it is off when the cabinet door is shut),
- permanent lighting (for ambient lighting with a cabinet fitted with a glass door, for example).
• Press the
, key continuously, the main menu will appear. Press the
or
key to select the menu
then press the
key to
confirm.
• Press the
or
, key to select your lighting mode.
• Press the
key to confirm your selection.
Comment: When
is selected, you have 15 seconds to select and confirm the desired lighting
mode, otherwise the display automatically returns to the temperature of the cabinet.
VII- Pairing the remote control with the wine cabinet
To function, the remote control must be paired with your wine cabinet. If this is not the case, carry out this procedure within 2 minutes of plugging
in your wine cabinet.
• Press the
key continuously then press the
or
key to select the menu
then press the
, key to confirm. The cabinet
pictogram
is then selected.
• Press the
, or
key to specify the number of the cabinet then confirm via the
,
key, the controls pictogram
is then selected.
Press the
or
key to specify the number of the remote control then confirm by pressing the
key.
Your remote control and cabinet are paired when the temperature and humidity are displayed.
If you have a second remote control, allocate a number to it which is different from that allocated to the one already in your possession.
7 - C
ommissioning
your
Wine
CaBinet
1
