Euro Video EVD-16/400A1DH Series Скачать руководство пользователя страница 3

Страница: 3 / 196

User Manual of EVD-16/400A1DH Series DVR

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present:

Special measures and precautions must be

taken when using this device. Some potentials (voltages) on the device may present a

hazard to the user. This device should only be used by the Employees from our company

with knowledge and training in working with these types of devices that contain live circuits.

Power Supply Hazardous Voltage:

AC mains voltages are present within the power supply assembly. This

device must be connected to a UL approved, completely enclosed power supply, of the proper rated voltage and

current.

No user serviceable parts inside the power supply.

System Grounding (Earthing):

To avoid shock, ensure that all AC wiring is not exposed and that the earth

grounding is maintained. Ensure that any equipment to which this device will be attached is also connected to

properly wired grounded receptacles and are approved medical devices.

Power Connect and Disconnect:

The AC power supply cord is the main disconnect

device to mains (AC power).The socket outlet shall be installed near the equipment and

shall be readily accessible.

Installation and Maintenance:

Do not connect/disconnect any cables to or perform installation/maintenance

on this device during an electrical storm.

Содержание EVD-16/400A1DH Series





































































































































































































Результаты поиска

Содержание EVD-16/400A1DH Series

Отзывы:

Похожие инструкции для EVD-16/400A1DH Series

Бренды по названию

Популярные бренды

Euro Video EVD-16/400A1DH Series, Руководство пользователя

Результаты поиска

Содержание EVD-16/400A1DH Series

Отзывы:

Похожие инструкции для EVD-16/400A1DH Series

Бренды по названию

Популярные бренды