Euro Video EVD-16/400A1DH Series Скачать руководство пользователя страница 22

Страница: 22 / 196

User Manual of EVD-16/400A1DH Series DVR

1.6 Starting Up and Shutting Down the DVR

Purpose:

Proper startup and shutdown procedures are crucial to expanding the life of the DVR.

Before you start:

Check that the voltage of the extra power supply is the same with the DVR‟s requirement, and the ground

connection is working properly.

Starting up the DVR:

Steps:

Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an

Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power indicator LED on

the front panel should be red, indicating the device gets the power supply.

Press the POWER button on the front panel. The Power indicator LED should turn green. The unit will begin

to start.

After startup, the Power indicator LED remains green/blue.

Shutting down the DVR

Steps:

There are two proper ways to shut down the DVR. To shut down the DVR:

• OPTION 1: Standard shutdown

Enter the Shutdown menu.

Menu > Shutdown

Figure 1.7 Shutdown Menu

Select the

Shutdown

button.

Click the

Yes

button.

• OPTION 2: By operating the front panel

Press and hold the POWER button on the front panel for 3 seconds.

Enter the administrator‟s username and password in the dialog box for authentication.

Click the

Yes

button.

Note:

Do not press the POWER button again when the system is shutting down.

Rebooting the DVR

While in the Shutdown menu (Figure 7), you can also reboot the DVR.

Содержание EVD-16/400A1DH Series





































































































































































































Результаты поиска

Содержание EVD-16/400A1DH Series

Отзывы:

Похожие инструкции для EVD-16/400A1DH Series

Бренды по названию

Популярные бренды

Euro Video EVD-16/400A1DH Series, Руководство пользователя

Результаты поиска

Содержание EVD-16/400A1DH Series

Отзывы:

Похожие инструкции для EVD-16/400A1DH Series

Бренды по названию

Популярные бренды