21
POWER IN connector
1675 Power Supply for Picolo.net HD1, a 12V DC 40 W universal power block is available as
accessory.
Risk of Permanent Damage
Electronic devices can be damaged by applying excessive or incorrectly polarized DC voltages.
Use exclusively 12-24V DC power sources. Check power supply wiring before applying power.
2.6. Configuration
First Boot
1.
Apply power and check if the Power OK green LED turns on.
2.
Wait about one minute until the completion of the boot procedure.
3.
Check if the Video Present LED indicators of all inputs attached to a valid video source are
turned ON.
First Network Session
1.
Install the
Euresys ONVIF Device Scanner
application software utility on a Windows or Linux
computer attached to the same LAN.
2.
Ensure that at least one of the following conditions is satisfied on the LAN:
□
A DHCP server is active and authorized to deliver an IP address for the MAC address of the
LAN interface.
□
The computer TCP/IP stack is configured for dynamic IP allocation.
3.
Run the
Euresys ONVIF Device Scanner
utility. At the completion of the scanning process, all
discovered ONVIF devices appear in the discovered ONVIF devices list.
4.
Select a device in the list by clicking its [IP] field. The right pane displays the properties of the
selected device.
5.
Open the device Home page by clicking the [Show] button.
Picolo.net
Getting Started
2. Installing a Picolo.net
