19
Analog Audio Input
Using a 3.5 mm jack, connect an analog stereo (or mono) line-level audio sources to the AUDIO
IN connector.
3.5 mm stereo jack
Analog Audio Output
Using a 3.5 mm jack, connect an analog stereo (or mono) line-level audio sink to the AUDIO OUT
connector.
Network
Connect the device to the local area network by attaching a RJ-45 network cable into the LAN
connector.
USB External Storage
USB for external storage
With a USB type A (full size) connector, connects a USB storage device to any of the USB
connectors.
Devices exceeding 2.5 W must be powered externally.
USB for GPS
With a USB type A (full size) connector, connects a USB GPS device to any of the USB
connectors.
Serial COM
Connect one serial device to the COM connector via a 8-pin 3.81 mm pitch terminal plug using
one of the following wiring options:
●
For a full-duplex RS-422 device:
a.
Connect the TxD- and the TxD+ output signals respectively to the RxD- (pin 1) and the
RxD+ (pin 2) inputs of the 8-pin terminal plug
b.
Connect the RxD- and the RxD+ input signals respectively to the TxD- (pin 3) and the TxD+
(pin 4) outputs of the 8-pin terminal plug
c.
Connect the GND signal and/or the cable shield to the GND (pin 5 and/or pin 6) of the 8-pin
terminal plug
●
For a half-duplex RS-485 device:
Picolo.net
Getting Started
2. Installing a Picolo.net
