Eureka 4880 Series, Руководство пользователя

Страница: 6 / 20

6
6. You will find your cord retainer on the handle above
the upper cord hook. Firmly push the electrical cord
down into the cord retainer before using the vacuum.
This will place the cord out of the way while you are
vacuuming. Remove cord from retainer when ready
to store vacuum or when using hose and
attachments.
7. Next wind the cord around the two cord hooks on
the back of cleaner.
The upper cord hook turns to
release the cord. Turn the hook up to store the cord.
8. Secure the plug to the cord to prevent unwinding.
Cord
Hook
Step C Store Electrical Cord
Step D Check Dust Cup
Cord
Hook
7
7
Cord
Retainer
6
How to Remove the Cyclonic Dust Cup
9. With handle in upright position, locate dust cup lever
on the front of the cleaner. When facing the cleaner,
slide the lever to the left to the release position. The
dust cup platform will drop down.
10. Lift dust cup from the dust cup compartment.
Dust Cup
Lever
How to Replace the Cyclonic Dust Cup
11. See the above illustration. When replacing dust cup
tilt handle back slightly for easier installation. Locate
the notch on the dust cup and the tab on the inside of
the dust cup compartment. Line them up and slide
the dust cup into place on the dust cup platform.
12. Check to be sure the filter tube and dust cup are
properly lined up with the seals at the top of the dust
cup compartment for maximum performance.
13. Slide the dust cup lever to the right to the engage
position to secure the filter tube and dust cup.
Notch
Tab
Dust Cup
Platform
Remove and replace the dust cup to ensure it is properly
lined up with the seals in the dust cup compartment. During
shipment the dust cup may have moved affecting overall
performance.