Euphonix Modular I/O, Руководство по настройке

Страница: 31 / 112

Euphonix Modular I/O Configuration Guide Configuration
31
part description connector
width
(4HP slots) power (5vDC) weight
FC972 Frame Controller remote control module RJ45 (LAN) 1 ~300mA ~200g
SY982 Sync single sync input BNC (Sync In, WC Out) 1 ~300mA ~200g
SY983 Sync tri-level sync support BNC (Sync In, WC Out) 1 ~300mA ~200g
WC984 4x Word Clock Out word clock output x4 BNC x4 1 ~100mA ~150g
= discontinued
frame description PSU
front-plane
slots (4HP)
for local I/O
rear-plane
slots (4HP)
for local I/O
front/rear
backplane link
switch
audio isolated
redundant MADI-
over-Fiber interface
positions
power
IO93
standard double-sided
frame
dual redundant
hot-swappable
18 19 yes ---
~12 amps
@5vDC
IO94
single-sided frame for
stagebox use
dual redundant
built-in
--- 19 --- ---
~20amps
@5vDC
IO95
double-sided frame
for local-side MADI-
over-Fiber interface
dual redundant
hot-swappable
18 7 yes
4 typical
(up to 6 using local
I/O slots)
~12 amps
@5vDC
Sync: Each frame locks to a single sync source module fitted in slots 1~4 in the rear-plane.
Control: Remote operation of modules (when required) via a single FC972 Remote module. May be fitted in any slot.
All frames weight ~5.3kg
2.3 Summary Reference Spreadsheets
The following summary spreadsheets are provided:
•
Summery of Frames
•
Summary of Sync Modules
•
Summery of MADI Module
•
Summary of I/O Modules
•
Cross-reference Between MM934 MADI I/O and Audio Busses
2.3.1 Summery of Module Frames
Figure 2-9: Summery of Frames
2.3.2 Summary of Sync Modules
Figure 2-10: Summary of Sync Modules