Euphonix Modular I/O Configuration Guide
Product Description
14
General Description
The MM936 contains a single MADI I/O connected via two
multi-mode fiber transceivers for redundant MADI-over-Fiber
operation. The module is typically placed in an IO94
Stagebox frame and interfaces to the console via a MM936
and MM934 pair placed in an IO95 local-side interface frame.
The module features a master sync mode that allows it to
lock a frame to its MADI input. Certain settings are done
from on-board switches such as device ID. Buss
configuration is accomplished using a flexible crosspoint
matrix configured via web-browser interface.
Note: When used as the master sync source, the
MM936 MADI In/Out should only be removed from a
frame after the frame has been powered down.
Possible damage may occur to some I/O modules if
the master sync source is removed from a live frame.
Connections, Power Consumption, Width, Weight
Redundant multi-mode fiber: 62.5/125µm, 1310nm, one
fiber strand per direction (SC x4), ~500 mA, 4HP. ~150g.
1.2.4 SY982 Sync (discontinued-replaced by the SY983 Sync)
General Description
The SY982 contains an internal clock and can lock to
external AES Sync, Word Clock, or Video signal. Internal
sample rates are 44.1k, 48k, 88.2k, and 96k. The module
features a sync redundancy mode which allows two modules,
designated master and slave, to be fitted into a rack. If the
master loses sync, the slave automatically takes over.
SY982 Sync module(s) must be fitted into any of the four
reserved slots on the rear-plane. All settings are done from
on-board switches.
Note: The SY982 Sync module should only be
removed from a frame after the frame has been
powered down. Possible damage may occur to some
I/O modules if the master sync source is removed
from a live frame.
Connections, Power Consumption, Width, Weight
Содержание Modular I/O
Страница 2: ......
