Euphonix MixView CS2000, Руководство по эксплуатации, Страница: 276 / 324

Section 10: The Audio Cube
10 - 12 Euphonix CS3000/2000 Operation Manual
Operational configurations are often done on a session by session basis. It is
easy to reenter these menus and reconfigure aspects of the system as your
needs demand.
The first step in Operational Configuration is to define the bus types as to
their function. Buses are defined as “Aux” for use as Cube aux sends and
“Pan” for use in building Hyper Surround™ Panners.
Press the DSC [ Bus Master ] key to view the top level Cube Bus Master
menu.
Operational
Configuration
The lower right quadrant represents the 48 possible Cube output buses. As
mentioned earlier, each QBC card adds 4 buses. Therefore each row in the
screen above represents 3 cards or 12 output buses.
Notice the Link indicator for each of the 48 buses. The two white lines below
it is the Insert indicator. While in the Bus Configure menu use the SpinKnob to
select the desires bus (see the black box above the bus move). Now press [
F3 ]
to toggle the bus link on and off. Press [ F4 ] to toggle the Insert on and off. The
result can be seen in the menu and on the screen.
F3 F1 F2 F4
Define Bus Types
Bus Link and Insert
Below is a portion of the Cube Bus Configuration screen with no Cube buses
configured yet. With no buses configured, no Bus Master controls appear on
the screen.
AUX [none] 01:Lnk
F3 F1 F2 F4 F3 F1 F2 F4
F3 F1 F2 F4
Bus1-> OFF
AUX [none] 01:Lnk – –
I/O Bus Assign