Euphonix MixView CS2000, Руководство по эксплуатации

Страница: 273 / 324

Section 10: The Audio Cube
Euphonix CS3000/2000 Operation Manual 10 - 9
Lowers Only - This mode assigns Cube inputs to the Mix Controller’s lower
faders only. If there are fewer lower faders than Cube inputs, the remaining
Cube inputs are not assigned.
Uppers Only - This mode assigns Cube inputs to the Mix Controller’s upper
faders only. If there are fewer upper faders than Cube inputs, the remaining
Cube inputs are not assigned.
Wrapped [n] - Cube inputs are assigned to lower faders up to the channel
number in brackets. The remaining inputs are assigned to the upper faders.
Select the “wrap point” using the SpinKnob or [
+ ]/[ – ] keys then press [ F3 ] to
enter.
Lower/Upper - This mode divides the Cube inputs evenly between lower and
upper faders. Assignment starts with input 1 to channel 1 lower fader, then
input 2 to channel 1 upper fader. Assignment of inputs continues alternating to
lower then upper faders until all Cube inputs or all faders are assigned (which-
ever comes first).
L/U Chan [n] - Cube inputs are assigned starting at lower fader 1 in an
alternating Lower/Upper fashion always assuring that [n] number of lower
faders will have Cube input assignments.
Select the lower fader number using the SpinKnob or [ + ]/[ – ] keys, then press
[ F3 ] to enter:
F3 F1 F2 F4
L/U [16] [Yes]