manualshive.com logo in svg

Euphonix MixView CS2000, Руководство по эксплуатации, Страница: 173 / 324

Поделиться
Скачать
Euphonix MixView CS2000 Скачать руководство пользователя страница 173

Section 7: Automation

Euphonix CS3000/2000 Operation Manual

7 - 11

Pass Control

The Pass Control screen is one of the most useful tools in the Euphonix Mix
System. To access this screen, press the [

Pass Ctrl

]

 

key next to the 

Pass Rec

key.

The Pass Control screen shows the pass tree, cue points, automated snapshot
events, aux  moves, EQ, pan moves, fader moves and mutes.

The first thing on the screen is the pass tree. There are 8 passes in the mix
shown above. The currently selected pass is indicated in green on the pass
tree and also to the left of the pass tree. Blue indicates saved passes.

To the right of the pass tree you will see the event count of the currently
selected pass and the cumulative event count of the entire mix from that pass
back to the start. This is followed by the start and end timecode points of the
currently selected pass.

Allows setting of start and end points for automation editing.

Displays cue points. A Cue list can be generated “on-the-fly”  and used for
quick locating and cycling. These cue points are graphically displayed on this
line for reference.

Displays automated snapshot event times and snapshot number. Automating
snapshots is covered later in this section.

When the pass is finished, a graphic display of aux knob movements or EQ
parameters will appear along the time line.

When the pass is finished, a graphic display of pan knob movements left and
right of a center line will appear above and below the time line respectively.

Pass Tree

CUES

AUX A-D

PAN BAL

Event Count

SNAPS

Screen Anatomy

EDIT

Current pass
start & end
times

Window view times

Current Pass

Grey shaded lines
and black blocks
represent mutes

Title Head mark

Event
Counts

Title Tail mark

Selected channel

Cnfigurable to
show Aux or EQ

Automated
SnapShot

Содержание MixView CS2000





































































































































































































































































































































Отзывы:

Нет отзывов