When button
③
is pressed the LED display shows second information set.
72
476.3
The value in upper line is the battery charge level given in percent [%]. The value in lower
line of display is the total energy transferred to battery given in Wat hours [Wh], measured
from the charger power on.
Another pressing of the button will display the
③
delayed charging time and the estimated
time to complete charging.
01:00
03:34
While charging the LED diode
⑦
should be red.
After charging:
Once the set charge level has been reached, the charger will turn off the output circuit and
will report the end of charging displaying the "End" flashing in the bottom line.
100
End
The LED diode
⑦
should be green.
By pressing the button
③
you can switch information on the display.
NOTE: the displayed
information is frozen when charging is completed.
The display shows the voltage,
current and charge level registered at the end of charging.
After charge ends, charging can be resumed only when:
- the button
③
is held down for 3 seconds and the user goes through the whole settings
menu and leaves it.
- the charger will be powered off and after a few seconds will be powered on (hard reset)
4
King Song Poland
