EUNICYCLES SC-350, Руководство пользователя

Страница: 7 / 17

ATTENTION: when charging up to 100%, it may happen that the LED diode turns
⑤
green before "End" appears on the display. The actual end of charging will however
takes place only when "End" appears on the display.
Switching between fast and slow charging
The charger give possibility to charge with two configurable modes: fast and slow. The
current level can be set for each of the modes in
Settings menu . Switching between
modes can be done by fast double click of button
③
. The display will show new mode and
then the current level will be automaticaly adjusted to specifed value.
Charge Fast mode:
chrg
fa5t
Charge Slow mode:
chrg
5low
ATTENTION: the setted current can be little different than the real used (± 0.2A). The
charger constantly adjusts the current level during the charging process.
ATTENTION: this function is not available when the Slow charge threshold is setted.
Default screen
When the charger is switched on, the screen will display one of three information screens.
The displayed screen is the default one. When the charger is started for the first time, the
default screen informs about voltage and charging current. To change the default screen,
press the button
③
for 3 seconds until entering the Settings menu . Then go through the
entire menu and leave it. From now on, the screen (information) that was displayed before
entering the setting menu, will be the default.
King Song Poland 5