13
112663-05-03/15 (translation of the original operating instructions)
Operating Instructions
Non-Contact Safety Switch CES-AP-C01-…
EN
9.6. Connection
The switch can be reset via the RST input. To do this, a voltage of 24 V is applied to the RST input for at least 3 seconds.
The RST input must be connected to 0 V if it is not used (only devices with plug connector M12, 8-pin).
WARNING
In case of an error, loss of the safety function through incorrect connection.
Ì
To ensure safety, both safety outputs (OA and OB) must always be evaluated.
Important!
The example shows only an excerpt that is relevant for connection of the CES system. The example
illustrated here does not show complete system planning. The user is responsible for safe integration
in the overall system. Detailed application examples can be found at www.EUCHNER.de. Simply enter
the order number of your switch in the search box. All available connection examples for the device
can be found under “Downloads.”
24 V DC
GND
-F1
Connected
load
Safety
Outputs
Monitoring
Output
Read Head
5
DIA
-B10
UB
1
3
0V
2
OA
4
OB
CES
Figure 2:
Connection example CES-AP-…
