[5]
1.3.12. Install the coffee grinder only in locations where its operation can be supervised by trained persons.
1.3.13. Route the mains cable such that it does NOT become a trip hazard.
1.3.14. Do not kink the mains cable or route it over sharp edges.
1.3.15. Carry out replacement of listed components (also see 6.1.) as described in the respective instruction
sheets, following the instructions carefully. In the event of uncertainty, contact the manufacturer or your
dealer.
1.3.16. Repair other than the replacement of the listed components (see 6.1.) may only be carried out by
authorized specialist personnel. Liability and guarantee claims shall be excluded in the event of own
repairs, improper connection, and improper operation. In the event of damage to the power cable, it must
be replaced by the manufacturer, dealer, or appropriately qualified specialist personnel.
1.3.17. The coffee grinder may only be used indoors and never in humid rooms and/or the rain.
1.3.18. Improper and negligent handling of packaging elements with sharp edges can lead to injury and may
be hazardous. Store packaging elements out of the reach of children and persons with limited physical,
mental, and/or sensory capacity.
1.3.19. Never use inappropriate objects (cutlery, scissors, needles, etc.) to clean the coffee grinder or
remove coffee beans/grounds.
1.3.20. Make sure not to have children playing with the grinder, its parts or packaging. Children can become
entangled or suffocate while playing.
1.3.21. Make sure to install the grinder on an even and stable surface to prevent it from falling off.
1.4. Safety Equipment on the Coffee Grinder
1.4.1. Machine Safety switch
This coffee grinder has one
safety switch
. In the event that power consumption is too high, the safety
switch will trigger and interrupt the circuit. To rectify the fault, the cause of the excessive power
consumption must be identified (see 6.2.2.). Following rectification: Depress the switch, which is located on
the base of the grinder (from OFF to ON), to reestablish the circuit (also see 6.2.4.).
1.4.2. Heat detector
The detector attached to the motor will trigger as soon as the temperature of the motor exceeds 70
degrees Celsius. In that case, the grinder will automatically turn off and can no longer be operated.
Operation can and will continue once the device has cooled down to 60 degrees Celsius (also see 6.2.3.).
1.4.3 Extended Rush Hour Feature (Cooling System) – only etzMAX‐plus
All Plus‐versions are equipped with a cooling system, turning the grinder off when reaching 75°C and back
on at 65°C (cooling capacity: 1.7‐2°C/minute).
