[19]
5.1.1. Removing the Bean Hopper
Turn the bean blocker handle (8) forwards 180°. The bean supply is now stopped.
Place the portafilter in the holder (17), press the START button, and grind until the grinding chamber is
empty and/or no further beans are drawn in (approx. 8.5 g).
Open the locking levers (5, 7) by turning them rearwards as far as they will go.
Set the portafilter down on one side.
Remove the mains plug from the socket and/or disconnect the grinder from the circuit (ON‐OFF switch on
the base of the grinder, see also 6.2.5.) before continuing.
Lift the bean hopper out of the holder (6, Fig. 15). Close the locking levers (5, 7).
Fig. 15
5.1.2. Removing the Grind Size Adjustment (14)
Pull the portafilter holder (17) from the center hook (18, Fig. 16). Note down the grind size settings before
continuing.
Fig. 16
