[12]
Once you have adjusted the holder to the desired
height, you can insert it on the center hook on the
front of the grinder (18, Fig. 5) and slide it rearwards
as far as it will go (Fig. 6).
Fig. 5/Fig. 6
4.3. Programming
4.3.1. Button Programming (Time‐Based Grinding)
The etzMAX user interface has
three programmable buttons
marked 1, 2, and 3 (Fig. 7). These buttons are
solely for
setting the grinding time in seconds
.
Factory setting LIGHT:
1= 4.3 seconds 2= 5.6 seconds 3= 7.0 seconds
Factory setting M/PLUS:
1= 3.0 seconds 2= 3.5 seconds 3= 4.5 seconds
The factory setting can be adjusted and/or programmed as follows:
Select a
PRESET button
Press the
+ or ‐
button to set the grinding time (in seconds)
As soon as you have reached the desired grinding time (in seconds), press and hold the selected PRESET
button for approx.
3 seconds
or until the display flashes. The setting is confirmed.
Repeat steps 1 ‐ 3 to program the other buttons.
4.3.2. Button Programming (Weight‐Based Grinding ‐ W versions only)
The etzMAX user interface has
three programmable buttons
marked 1, 2, and 3 (Fig. 7). These buttons are
solely for
setting the grinding quantity in grams.
Factory setting:
1 = 14 grams 2 = 18 grams 3 = 22 grams
The factory setting can be adjusted and/or programmed as follows:
Select a
PRESET button
Press the
+ or ‐
button to set the grinding quantity (in grams)
As soon as you have reached the desired grinding quantity (in grams), press and hold the selected
PRESET button for approx.
3 seconds
or until the display flashes and there is a confirmation sound. The
setting is confirmed.
Repeat steps 1 ‐ 3 to program the other buttons.
