[10]
4. OPERATION
4.1. Before Operation
Read the operating instructions and general information and safety information carefully. Take care
not to damage the coffee grinder when opening the packaging. Proceed with caution and avoid the use of
sharp objects.
Carefully remove the coffee grinder from the packaging and check that the delivery is complete (see 3.2.).
Check the coffee grinder and/or individual parts for damage. Do not use the coffee grinder if there are signs
of damage. In that case, contact the manufacturer or your dealer. Keep packaging material out of the reach
of children and ensure that it is properly disposed of.
Before initial installation, clean the housing and portafilter holder with a soft, slightly damp cloth. Clean the
bean hopper with clean water and allow all parts to dry thoroughly.
4.2. Initial Installation
ATTENTION!
Position the coffee grinder on a level, stable, and vibration‐free surface that is able to bear the weight of
the grinder.
Insert the plug into a properly fitted socket of the correct voltage.
4.2.1. Bean hopper
Slide the lid of the bean hopper from the back or front onto the bean hopper so that OPEN is at the 6 o’
clock position and CLOSE at the 12 o’ clock position.
Installing Bean Hopper
Turn the two locking levers (5, 7) on the left and right of
the hopper holder (6) rearwards in the OPEN arrow
direction as far as they will go (Fig. 1).
Fig. 1
