D00219 Revision E
– 2019-07-19 - Page 4
DO NOT OPERATE WITH SUSPECTED EQUIPMENT FAILURES.
If any odor or
smoke becomes apparent turn off the equipment and unplug it immediately. Failure to do so
may result in electrical shock, fire or permanent damage to the equipment. Contact the factory
for further instructions.
DO NOT OPERATE IN WET/DAMP CONDITIONS:
If water or other liquid penetrates
the equipment, unplug the power cord and contact the factory for further instructions.
Continuous use in this case may result in electrical shock, fire or permanent damage to the
equipment.
DO NOT OPERATE IN HIGH HUMIDITY:
Operating the equipment in high humidity
conditions will cause deterioration in performance, system failure, or present a shock or fire
hazard. Contact the factory for further instructions.
DO NOT OPERATE IN AREAS WITH HEAVY DUST:
Operating the equipment in
high dust conditions will cause deterioration in performance, system failure, or present a shock
or fire hazard. Contact the factory for further instructions
.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
: Operating the equipment in
the presence of flammable gases, powders, or fumes
CONSTITUTES A DEFINITE SAFETY
HAZARD
. For equipment designed to operate in such environments the proper safety
devices must be used such as dry air or inert gas purge, intrinsically safe barriers and/or
explosion-proof enclosures.
DO NOT USE IN ANY MANNER NOT SPECIFIED OR APPROVED BY THE
MANUFACTURER
: Unapproved use may result in damage to the equipment or present an
electrical shock or fire hazard.
MAINTENANCE and SERVICE
CLEANING: Keep surfaces clean and free from dust or other contaminants. Such
contaminants can have an adverse effect on system performance or result in electrical shock or
fire. To clean, use a damp cloth. Let dry thoroughly before use. Do not use detergent, alcohol
or antistatic cleaner as these products may have an adverse effect on system performance.
SERVICE: Do not attempt to repair or service the instrument yourself unless instructed by the
factory to do so. Opening or removing the covers may expose you to high voltages, charged
capacitors, electric shock and other hazards. Opening or removing the covers without
authorization voids the warranty on the system. If service or repair is required, contact
the factory.
