D00219 Revision E
– 2019-07-19 - Page 11
4.3. CONFIRM THE VOLTAGE SCRIPT
For each pin pair in the PinScript, a sequence of discharge pulses will be applied, at specific
voltages listed in the Voltage Script
. (A.K.A. “VScript”)
The system will have a Voltage Script loaded and ready to run and its number will appear in the
VScript Ref# field. (7001 as shown in the example above). Click on GO to accept this Voltage
script.
4.4. ENTER THE TEST AND DEVICE DESCRIPTIONS
The Test Description field and the Device Description field are free-form fields.
For this quick-start run, leave these fields blank and click on GO to accept.
Next are the testing options shown at the right of the screen:
4.5. SELECT THE TESTING ORDER
Leave this option as-is:
Voltage Script #
