2
1.4 Connectors
Ethernet:
Connect a RJ45 network cable.
DC IN:
Connect the regulated power supply, DC 5V or 12V depending on the model you have.
RESET:
With the power connected, press to reset all parameters, including the IP address to factory default
settings.
The camera will reboot after default reset. Please do not disconnect your camera during the reset
process.
Alarm in / Alarm out: For external alarm device connection, please refer to “1.5 External Alarm Connection” at page 2.
Line in (Blue) /
Line out (Green)
Support speaker and microphone connection.
1.5 External Alarm Connection
This series of cameras supports external I/O device connection for easy connection.
Below is how to connect an external device to this series.
1.6 Status Indicator (For selected models only)
ICON
LAN connection status
Internet connection status
System Status
During powering on
Always on
Always on
Blinking
(on 250 ms, off 250 ms)
Always off
Reset default
Blinking
(on 250 ms, off 250 ms)
Blinking
(on 250 ms, off 250 ms)
Upgrade
Connection Status
LAN connected
Always on
--
Blinking
(on 100 ms, off 500 ms)
--
LAN disconnected
Internet connected
--
Always on
Blinking
(on 100 ms, off 500 ms)
Internet disconnected
--
3G Connection Error on
iPhone / iPad / Android Mobile Device
--
Blinking
(on 5 sec, off 0.5 sec, on 0.5 sec, off 0.5 sec, on 5 sec)
3G Connection Setting
Uncompleted
--
* LED blinking frequency -
LED on /
LED off
