©2016 ETS Corporation |
iSC250 Installation and Configuration Guide
4
This information is CONFIDENTIAL and must be used exclusively for the operation of ETS software, hardware, or services. It
may not be duplicated, published, or disclosed without the express permission of ETS.
2.
Remove the protective film from the graphical display screen.
3.
Save the carton and packing material for repackaging or moving the device in the future.
Selecting the Device Location
The iSC250 may be mounted on a flat surface, wall, or customer stand (recommended). Ingenico
recommends physically securing the device to avoid theft. Power may be provided from a host Point of
Sale system or from an Ingenico power supply. If using an Ingenico power supply, the device must be
placed close to an easily-accessible power outlet.
Note 1: Do not place the iSC250 on a PC monitor, adjacent to an electronically active security tag,
deactivation system, or near other sources of magnetic fields.
Note 2: The iSC250 must be at least 12 inches away from an electronically active type of security tag
deactivation pad. There are two types of security tag deactivation systems:
An electronically active system sends out a powerful and potentially disruptive signal to
deactivate the security tag. If the iSC250 is placed too close to the system’s pad, or placed
above the pad, malfunction may occur.
A passive system is a permanent magnet type that does not send out a signal. This type does
not affect the iSC250
A.
iSC250
B.
Stylus
C.
Cable (specific to
your connectivity
requirements)
D.
Power Supply