©2016 ETS Corporation |
iSC250 Installation and Configuration Guide
13
This information is CONFIDENTIAL and must be used exclusively for the operation of ETS software, hardware, or services. It
may not be duplicated, published, or disclosed without the express permission of ETS.
14
Enter the DHCP Settings Menu
a.
Press the
[1]
key on the terminal keypad
to enter the
DHCP Settings
menu.
NOTE
: If you accidentally select the wrong menu
item, press the yellow clear button or the red
cancel button to return the menu prompt. If you
are unable to return to this screen for any reason,
restart and repeat the steps above.
15
Select DHCP Type
a.
Press the
[0]
key on the terminal keypad
to select
Auto
as the desired connection
method.
b.
Press the red
Cancel
key to return to the
Communication menu (previous screen)
NOTE
: If you accidentally select the wrong menu
item, press the yellow clear button or the red
cancel button to return the menu prompt. If you
are unable to return to this screen for any reason,
restart and repeat the steps above.
16
Enter the Host IP Address Menu
a.
Press the
[2]
key on the terminal keypad
to enter the
Host IP Address
menu
NOTE
: If you accidentally select the wrong menu
item, press the yellow clear button or the red
cancel button to return the menu prompt. If you
are unable to return to this screen for any reason,
restart and repeat the steps above.
