©2016 ETS Corporation |
iSC250 Installation and Configuration Guide
20
This information is CONFIDENTIAL and must be used exclusively for the operation of ETS software, hardware, or services. It
may not be duplicated, published, or disclosed without the express permission of ETS.
8
Enter the Communication Menu
a.
Press the
[0]
key on the terminal
keypad to enter the
Communication menu.
NOTE
: If you accidentally select the wrong
menu item, press the yellow clear button or
the red cancel button to return the menu
prompt in Step 5. If you are unable to
return to this screen for any reason repeat
steps 1-8.
9
Enter the Communications Type Menu
a.
Press the
[0]
key on the terminal
keypad to enter the
Communication Type menu.
NOTE
: If you accidentally select the wrong
menu item, press the yellow clear button or
the red cancel button to return the menu
prompt in Step 5. If you are unable to
return to this screen for any reason repeat
steps 1-9.
10
Configure USB Serial Communication Mode
a.
Press the [
4
] key on the terminal
keypad to select USB Serial
Communication as the desired
communication method.
b.
Press the red Cancel key to return
to the Communication menu
(previous screen).
NOTE
: If you accidentally select the wrong
menu item, press the yellow clear button or
the red cancel button to return the menu
prompt in Step 5. If you are unable to
return to this screen for any reason repeat
steps 1-10.
