©2016 ETS Corporation |
iSC250 Installation and Configuration Guide
18
This information is CONFIDENTIAL and must be used exclusively for the operation of ETS software, hardware, or services. It
may not be duplicated, published, or disclosed without the express permission of ETS.
3
Wait for the Telium Manager to finish
initialization. Get ready to quickly perform
the key sequence in the next step.
(No operator actions are performed during
this step)
4
Enter the Telium Manager Access Code
a.
As soon as this screen appears,
IMMEDIATELY press the following
4-digit key sequence
[2], [6], [3],
[4]
followed by the [Enter] key.
NOTE
: Failing to enter the code in a timely
manner will prevent access to the Telium
Manager configuration application. If this
should occur, repeat steps 1-4 until the
screen displayed in step 5 appears.
If USB-CDC does not appear on the last line
of the screen, the device will need to be
configured for USB mode (Steps 9-10)
