IV
which becomes conductive due to condensation which is expected. In
such conditions, equipment is normally protected against exposure to
direct sunlight, precipitation, and full wind pressure, but neither
temperature nor humidity is controlled.
Storage environment
Location: indoor
Relative humidity: <70%
Temperature: -10
℃
~ 70
℃
Power cord for the United Kingdom
When using the power supply series in the United Kingdom, make sure the power cord meets the following safety
instructions.
NOTE: This lead/appliance must only be wired by competent persons.
: THIS APPLIANCE MUST BE EATHED.
IMPORTANT: The wires in this lead are coloured in accordance with the following code:
Green/Yellow:
Blue:
Brown:
Earth
Neutral
Live
As the colours of the wires in main leads may not correspond with the colours marking identified in your
plug/appliance, proceed as follows:
The wire which is coloured Green & Yellow must be connected to the Earth terminal marked with the letter E or
by the earth symbol
or coloured Green or Green & Yellow.
The wire which is coloured Blue must be connected to the terminal marked with the letter N or coloured Blue or
Black.
The wire which is coloured Brown must be connected to the terminal marked with the letter L or P or coloured
Brown or Red.
If in doubt, consult the instructions provided with the equipment or contact the supplier.
This cable/appliance should be protected by a suitably rated and approved HBC mains fuse: refer to the rating
information on the equipment and/or user instructions for details. As a guide, cable of 0.75mm
2
should be protected by
a 3A or 5A fuse. Larger conductors would normally require 13A types, depending on the connection method used.
Any moulded mains connector that requires removal/replacement must be destroyed by removal of any fuse & fuse
carrier and disposed of immediately, as a plug with bared wires is hazardous if a engaged in live socket. Any re-wiring
must be carrier out in accordance with information detailed on this label.
