ETM 71610, Руководство пользователя

Страница: 28 / 53

For Support Contact +46 8 25 28 75, sales@etmiot.se or +61 2 9956 7377, sales@etmiot.com.au
put into command mode but it must also not be asleep. Another way is that when the
wireless modem connects by TCP or UDP the server can issue commands to resynchronize
the wireless modems Real Time Clock and Reference Date.
Channel selection
Select the channel to be logged and the type of logging required.
Send interval logged data (SWT2)
Causes the archived/logged data in any selected inputs to be sent every X minutes.
The data will be sent to the IP-address and port specified as IP1 or IP2, these are specified
in the Communication tab.
[#21] will send logged channel data with timestamps.
[#22] will send logged data scaled according to settings in the Channel Scaling tab.
[#32] will send extra control parameters
Monitoring data (SWT3)
This will send certain types of data through port 2800, depending on your choice:
•
[#1] format, Info status - current device information
•
[#3] format, Unit ID
•
[#4] format, Analogue Port status
•
[#5] format, Not used for DeltaBlack
•
[#6] format, Digital Port status
•
[#7] format, Latest logged value
•
[#8] format, ET-Command response
– this allows the server to interrogate the wireless
modem.
These data types are defined in the separate document "ETM Modems TCP UDP Protocol
spec". Contact ETM for details.
Monitoring data (SWT4)
This will send certain types of data trough port 2880 (see above for description).
Wake up interval low power (SWT5)
This is used when you wish to operate a unit in sleep mode to conserve power. In sleep
mode the unit’s power consumption drops to approximately 0.1 mA. The device digital and