Etic Telecom RAS Series, Руководство по установке

Страница: 25 / 74

SETUP
DOC_DEV_Router setup guide_A
page 25
Remote access menu
«Automatic management of the remote users» checkbox :
If that checkbox is selected, the Router allocates automatically an unused IP address of the LAN network to
a remote user when he connects.
Unselect that checkbox to set-up the pool of fixed IP addresses which can be allocated to the remote users.
That IP addresses must belong to the LAN domain.
Advanced parameters
5.3 Wi-Fi access point set-up
Remark : The Wi-Fi module can be set-up either like a client or like an access point.
To set-up the Wi-Fi access point,
•
Select the Set-up > LAN interface > Wi-Fi access point menu
•
Select the Wi-Fi access point checkbox
« Network name (SSID) » parameter :
Enter the
name assigned to the Wi-Fi network to which the Router has to connect.
Attention : The SSID is case sensitive.
« Preshared key » parameter :
Enter the WPA preshared key (at least 8 characters).
« Country code» parameter :
The RF channels allocated to the Wi-Fi service are not the same in all the countries.
It is why, the country code has to be entered carefully.
Click the help menu to display the list of the country codes.
« Wi-Fi Mode» parameter :
Select one of the possible Wi-Fi modes :
Mode 802.11a : 5 GHz OFDM
Mode 802.11.b : 2,4 GHz DSSS
Mode 802.11.g : 2,4 GHz OFDM
Remark : the selected Wi-Fi mode must be entered in each Wi-
Fi client (tablet …).
« RF channel» :
Select a traffic channel in the list.