Etic Telecom RAS Series, Руководство по установке

Страница: 12 / 74

PREPARING THE SETUP
Page 12
DOC_DEV_Router setup guide_A
4 Temporary return to the factory settings
If the IP address of the Router could not be founded, or if it is impossible to access the administration server,
for example, following a configuration error, it is possible to restore the factory settings without losing the
current configuration.
•
Press the push-button located on the back, for example with a small screwdriver
•
Keep the push-button pressed for about 3 seconds;
• The LED blinks red rapidly
•
The administration server becomes accessible at the factory IP address (192.168.0.128), in HTTP without
a password. The factory configuration is temporarily running. However, the current configuration is not
lost and it is the one that is still displayed in the pages of the Administration Server.
•
After reading the IP address or changing some parameters, press again the push button or reboot the
product.
• The product can be reached at the registered IP address.
Note:
If the IP address of the Router is unknown, the software tool
EticFinder can be used.
This software detects all ETIC branded products on a local network. After starting the software, click on the
"Search" button, and when the product list is displayed, double-click on the product address to access the html
server.
5 Restoring the factory settings
It is possible to restore the factory configuration permanently using the push button on the rear panel, or by
using the administration server. In this case, the current configuration will be lost unless it has been saved to
a file.
To restore the factory settings using the push button,
•
Power off the Router,
• Press the push-button located on the back, for example with a small screwdriver,
• Power on the Router, while keeping the push-button pressed at least 10 s.
The LED turns red; the Router boots and the factory configuration is restored.
Note: The factory configuration can also be restored via the menu
Maintenance > Configurations
management of the administration server.