7 www.ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
7
Attaching the diffuser to the housing
□
Insert one end of the diffuser (B) into the end cap of the
housing (A) to the bottom of the limit part.
□
Push the other end of the diffuser (B) to the top of the
limit part on the opposite end cap.
□
Restore power to the electrical box.
□
Turn on the light switch to activate the fixture.
A
B
Limit part
Troubleshooting
WARNING:
Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem
Possible Cause
Solution
The fixture will not light.
The power is off.
Ensure the power supply is on.
The circuit breaker is off.
Ensure the circuit breaker is in the on position.
There is a bad connection.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
There is a defective switch.
Contact a qualified electrician.
The fuse blows or the
circuit breaker trips when
the light is turned on.
The wires are crossed or the
power wire is grounding out.
Check the wire connections.
Contact a qualified electrician or call customer
service 1-855-384-7754.
Care and Cleaning
CAUTION:
Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□
Clean the fixture with a soft, dry cloth.
□
Do not use cleaners with chemicals, solvents, or harsh abrasives.
□
Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.
Installation (continued)
