background image

8

MAINTENANCE

CARE OF THE 3101 DRY-WELL

The 3101 dry-well requires very little maintenance. Avoid operation in 
dusty, dirty, oily or wet environments.  If the case becomes dirty it may be 
cleaned using a damp cloth and mild detergent. Do not allow moisture 
to enter the case. It is important to check for and remove any foreign 
objects in the dry-well holes.

WARNING:

  Never introduce any fluids or other foreign material into 

the dry-well. This will damage the dry-well and could cause probes to 
become lodged. It could also cause a potential electric shock. In the 
event that the heat source should require service or repair, please contact 
ETI for assistance. There are no user serviceable parts inside and any 
attempted repair will void any guarantee.

GUARANTEE

This instrument carries a one-year guarantee against defects in either 
components or workmanship. During this period, products that prove to 
be defective will, at the discretion of ETI, be either repaired or replaced 
without charge. The product guarantee does not cover damage caused 
by fair wear and tear, abnormal storage conditions, incorrect use, 
accidental misuse, abuse, neglect, misapplication or modification. 
Full details of liability are available within ETI's Terms & Conditions 
of Sale at www.etiltd.com/terms. In line with our policy of continuous 
development, we reserve the right to amend our product specification 
without prior notice.

Содержание 271-401











Отзывы: