KL6600
www.ethink-spa.com
2
8. Automatically anti-freeze
9. Single color button backlighting
10. Low-voltage part (Light and Ozone) overcurrent protection.
11. Overcurrent protection of circulating pump
12. Auto Moisturizing (optional)
13. Switchbank, selecting the different functions.
14. Error code hinting
Ⅲ
. Function Description
Ⅰ
).Initial electrical testing
1.Voltage detection (When A8
＝
ON, it would ignore the voltage detection)
When it is initially power on, the system is working at a protecting status. LED shows “
”
The system is testing the voltage from the input transformer, when input voltage is beyond
280VAC, LED shows “
”, then the system stops working.
If input voltage is below 280VAC, the system will go into normal power supply.
In a normal power supply, turn off all the loads, and test the input voltage again.
It is normal working voltage if the voltage is below 260VAC, It is the over-voltage if it is
beyond 260VAC, then LED shows “
”. In these two kinds of situation, the system will not go
into normal operation.
Under this circumstance that the input voltage is normal, the system would go through the
following detections in sequence:
2. The current detection of Ozone
3. The current detection of 12VDC Light
4. The current detection of loads’ auto moisturizing. When B3
＝
OFF, it would ignore the
detection.
5. The current detection of circulating pump
Ⅱ
). Temperature Setup (77-104
℉
/25-40
℃
)
Being without any settings, the first time to press “
”or“
”, it enters to temperature setup. At
this time, the setting temperature is flashing in the LED. Before the temperature stop flashing, press
“
”or“
” again, it can change temperature settings. Within 6 seconds without any pressing, it will
exit and save settings temperature, and begin to show the current SPA temperature.
Ⅲ
).The Operation of “
”
1. Press and hold “
” for more than 5 seconds until it appears a flashing“
”on the
LED
,
it means that the system enters to the setting mode, and at the same time, it also enters to a
“real-time clock” setting.
