Hardened Web-Smart PoE Ethernet Switch
User’s Manual 3
The 100Base-FX Connections
The fiber port pinouts
The Tx (transmit) port of device I is connected to the Rx (receive) port of device II,
and the Rx (receive) port of device I to the Tx (transmit) port of device II.
The WDM 100Base-FX Connections
The fiber port pinouts
Only one single-mode optical fiber is required to transmit and receive data.
Functional Description
z
Meets NEMA TS1/TS2 Environmental requirements such as
temperature, shock, and vibration for traffic control equipment.
z
Meets EN61000-6-2 & EN61000-6-3 EMC Generic Standard Immunity
for industrial environment.
z
Manageable via Web browser interface.
z
Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing
Equipment (PSE).
z
Supports IEEE802.3/802.3u/802.3x. Auto-negotiation:
10/100Mbps-full/half-duplex; Auto MDI/MDIX.
z
100Base-FX: Multi mode SC or ST type; Single mode SC or ST type;
WDM Single mode SC type.
z
Supports 1024 MAC addresses. Provides 1M bits memory buffer.
z
Store-and-forward
mechanism.
z
Full wire-speed forwarding rate.
z
Alarms for power and port link failure by relay output.
z
Power Supply: Redundant 48VDC Terminal Block power inputs and
48VDC DC JACK with 100-240VAC external power supply.
z
Operating voltage and Max. current consumption: 1.5A @ 48VDC.
Power consumption: 72W Max.
z
-40
℃
to 75
℃
(-40
℉
to 167
℉
) operating temperature range.
