Hardened Web-Smart PoE Ethernet Switch
User’s Manual 15
Step 2: Disconnect the power cord if you want to shut down the switch.
48VDC DC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on
the topside of the switch.
Step 2: Connect the power cord to the AC to DC power adapter and attach
the plug into a standard AC outlet with the appropriate AC voltage.
Top View
Alarms for Power and Port Link Failure
Step 1: There are two pins on the terminal block used for power failure
detection. It provides the normally closed output when the power
source is active. Use this as a dry contact application to send a
signal for power failure detection.
