Hardened Web-Smart PoE Ethernet Switch
User’s Manual 17
Speed Connector
Port
Speed
Half/Full
Duplex
Cable Max.
Distance
10Base-T RJ-45 10/20
Mbps 2-pair
UTP/STP
Cat. 3, 4, 5
100 m
100Base-TX RJ-45
100/200
Mbps
2-pair
UTP/STP
Cat. 5
100 m
100Base-FX ST,
SC 100/200
Mbps
MMF (50 or
62.5µm)
2 km
100Base-FX ST,
SC 100/200
Mbps
SMF (9 or
10µm)
20, 40, or
75 km
Cabling
Step 1: First, ensure the power of the switch and end devices are turned off.
<Note>
Always ensure that the power is off before any installation.
Step 2: Prepare cable with corresponding connectors for each type of port
in use.
Step 3: Consult Cable Specifications Table on previous page for cabling
requirements based on connectors and speed.
Step 4: Connect one end of the cable to the switch and the other end to a
desired device.
Step 5: Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.
