EtherWAN EX26262 Скачать руководство пользователя страница 280

Страница: 280 / 326

– 280 –

HAPTER

| Monitoring the Switch

Displaying LLDP Information

◆

Echo Rx Tw – The link partner's Echo Rx Tw value.

◆

Resolved Tx Tw – The resolved Tx Tw for this link (not the link

partner). The resolved value that is the actual “tx wakeup time” used

for this link (based on EEE information exchanged via LLDP).

◆

Resolved Rx Tw – The resolved Rx Tw for this link (not the link

partner). The resolved value that is the actual “tx wakeup time” used

for this link (based on EEE information exchanged via LLDP).

◆

EEE in Sync – Shows if the switch and link partner have agreed on

wake times:

■

Red - Switch and link partner have not agreed on wakeup times.

■

Green - Switch and link partner have agreed on wakeup times.

NTERFACE

To display LLDP neighbor EEE information, click Monitor, LLDP, EEE.

Figure 142: LLDP Neighbor EEE Information

ISPLAYING

LLDP

ORT

TATISTICS

Use the LLDP Port Statistics page to display statistics on LLDP global

counters and control frames.

ATH

Monitor, LLDP, Port Statistics

ARAMETERS

These parameters are displayed:

Global Counters

◆

Neighbor entries were last changed at – The time the LLDP

neighbor entry list was last updated. It also shows the time elapsed

since last change was detected.

◆

Total Neighbors Entries Added – Shows the number of new entries

added since the switch was rebooted, and for which the remote TTL has

not yet expired.

◆

Total Neighbors Entries Deleted – The number of LLDP neighbors

which have been removed from the LLDP remote systems MIB for any

reason.

◆

Total Neighbors Entries Dropped – The number of times which the

remote database on this switch dropped an LLDPDU because the entry

table was full.

Содержание EX26262







































































































































































































































































































































Результаты поиска

Содержание EX26262

Отзывы:

Бренды по названию

Популярные бренды

EtherWAN EX26262, Руководство по управлению

Результаты поиска

Содержание EX26262

Отзывы:

Бренды по названию

Популярные бренды