EtherWAN EX26262 Скачать руководство пользователя страница 107

Страница: 107 / 326

HAPTER

| Configuring the Switch

Configuring Security

– 107 –

protocol address length (PLN) settings. (Options: Any - any value is

allowed, 0 - ARP/RARP frames where the HLN is equal to Ethernet

(0x06) and the (PLN) is equal to IPv4 (0x04) must not match this

entry, 1 - ARP/RARP frames where the HLN is equal to Ethernet

(0x06) and the (PLN) is equal to IPv4 (0x04) must match this

entry; Default: Any)

■

IP - Specifies whether frames can be matched according to their

ARP/RARP hardware address space (HRD) settings. (Options: Any -

any value is allowed, 0 - ARP/RARP frames where the HRD is equal

to Ethernet (1) must not match this entry, 1 - ARP/RARP frames

where the HRD is equal to Ethernet (1) must match this entry;

Default: Any)

■

Ethernet - Specifies whether frames can be matched according to

their ARP/RARP protocol address space (PRO) settings.

(Options: Any - any value is allowed, 0 - ARP/RARP frames where

the PRO is equal to IP (0x800) must not match this entry, 1 - ARP/

RARP frames where the PRO is equal to IP (0x800) must match this

entry; Default: Any)

◆

IPv4:

MAC Parameters

■

DMAC Filter - The type of destination MAC address. (Options: Any,

MC - multicast, BC - broadcast, UC - unicast; Default: Any)

IP Parameters

■

IP Protocol Filter - Specifies the IP protocol to filter for this rule.

(Options: Any, ICMP, UDP, TCP, Other; Default: Any)

The following additional fields are displayed when these protocol

filters are selected.

ICMP Parameters

■

ICMP Type Filter - Specifies the type of ICMP packet to filter

for this rule. (Options: Any, Specific: 0-255; Default: Any)

■

ICMP Code Filter - Specifies the ICMP code of an ICMP packet

to filter for this rule. (Options: Any, Specific (0-255);

Default: Any)

UDP Parameters

■

Source Port Filter - Specifies the UDP source filter for this rule.

(Options: Any, Specific (0-65535), Range (0-65535);

Default: Any)

■

Dest. Port Filter - Specifies the UDP destination filter for this

rule. (Options: Any, Specific (0-65535), Range (0-65535);

Default: Any)

Содержание EX26262







































































































































































































































































































































Результаты поиска

Содержание EX26262

Отзывы:

Бренды по названию

Популярные бренды

EtherWAN EX26262, Руководство по управлению

Результаты поиска

Содержание EX26262

Отзывы:

Бренды по названию

Популярные бренды