EtherWAN EX26262, Руководство по управлению

Страница: 103 / 326

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 103 –
W
EB
I
NTERFACE
To configure rate limits which can be applied to a port:
1.
Click Advanced Configuration, Security, Network, ACL, Rate Limiters.
2.
For any of the rate limiters, select the maximum ingress rate that will
be supported on a port once a match has been found in an assigned
ACL.
3.
Click Save.
Figure 33: ACL Rate Limiter Configuration
C
ONFIGURING
A
CCESS
C
ONTROL
L
ISTS
Use the Access Control List Configuration page to define filtering rules for
an ACL policy, for a specific port, or for all ports. Rules applied to a port
take effect immediately, while those defined for a policy must be mapped
to one or more ports using the ACL Ports Configuration menu ( page 100 ).
P
ATH
Advanced Configuration, Security, Network, ACL, Access Control List
U
SAGE
G
UIDELINES
◆
Rules within an ACL are checked in the configured order, from top to
bottom. A packet will be accepted as soon as it matches a permit rule,
or dropped as soon as it matches a deny rule. If no rules match, the
frame is accepted.
◆
The maximum number of ACL rules that can be configured on the
switch is 128.
◆
The maximum number of ACL rules that can be bound to a port is 10.