EtherWAN EX26262 Скачать руководство пользователя страница 152

Страница: 152 / 326

– 152 –

HAPTER

| Configuring the Switch

IGMP Snooping

When proxy reporting is enabled with this command, the switch

performs “IGMP Snooping with Proxy Reporting” (as defined in DSL

Forum TR-101, April 2006), including report suppression, last leave,

and query suppression.

Report suppression intercepts, absorbs and summarizes IGMP reports

coming from downstream hosts. Last leave sends out a proxy query

when the last member leaves a multicast group, and query suppression

means that neither specific queries nor general queries are forwarded

from an upstream multicast router to hosts downstream from this

device.

When proxy reporting is disabled, all IGMP reports received by the

switch are forwarded natively to the upstream multicast routers.

Port Related Configuration

◆

Port – Port identifier.

◆

Router Port - Sets a port to function as a router port, which leads

towards a Layer 3 multicast device or IGMP querier. (Default: Disabled)

If IGMP snooping cannot locate the IGMP querier, you can manually

designate a port which is connected to a known IGMP querier (i.e., a

multicast router/switch). This interface will then join all the current

multicast groups supported by the attached router/switch to ensure

that multicast traffic is passed to all appropriate interfaces within the

switch.

◆

Fast Leave - Immediately deletes a member port of a multicast service

if a leave packet is received at that port. (Default: Disabled)

The switch can be configured to immediately delete a member port of a

multicast service if a leave packet is received at that port and the Fast

Leave function is enabled. This allows the switch to remove a port from

the multicast forwarding table without first having to send an IGMP

group-specific (GS) query to that interface.

If Fast Leave is not used, a multicast router (or querier) will send a GS-

query message when an IGMPv2/v3 group leave message is

received. The router/querier stops forwarding traffic for that group only

if no host replies to the query within the specified timeout period.

If Fast Leave is enabled, the switch assumes that only one host is

connected to the interface. Therefore, Fast Leave should only be

enabled on an interface if it is connected to only one IGMP-enabled

device, either a service host or a neighbor running IGMP snooping.

Fast Leave is only effective if IGMP snooping is enabled, and IGMPv2 or

IGMPv3 snooping is used.

Fast Leave does not apply to a port if the switch has learned that a

multicast router is attached to it.

Fast Leave can improve bandwidth usage for a network which

frequently experiences many IGMP host add and leave requests.

◆

Throttling - Limits the number of multicast groups to which a port can

belong. (Range: 1-10; Default: unlimited)

Содержание EX26262







































































































































































































































































































































Результаты поиска

Содержание EX26262

Отзывы:

Похожие инструкции для EX26262

Бренды по названию

Популярные бренды

EtherWAN EX26262, Руководство по управлению

Результаты поиска

Содержание EX26262

Отзывы:

Похожие инструкции для EX26262

Бренды по названию

Популярные бренды